THERMAL INSULATION
Formerly: SIL-XL-C
Ideal material to maintain the ideal temperature
'INSUshield' is a non-fibrous, fire retardant (FR), closed cell, tri-dimensional chemically crosslinked polyethylene foam. It is certified 'Class O' in Fire Propagation and 'Class 1' in Surface Spread of Flame as per BS 476 Part 6 & Part 7 respectively. 'INSUshield' (chemically crosslinked polyethylene foam) is an ideal environment friendly insulation material, with a perfect solution for all your insulation needs for ducts, roofs, pipes, vessels etc. It is a better alternative to conventional Glass Wool insulation material. 'INSUshield' is also available in tubing form for pipe insulation.
FR, elastomeric Nitrile rubber tubing (NBR) for Pipe insulation
‘INSUflex’ (NBR tubing) is a fire retardant closed cell flexible elastomeric pre-formed tubing thermal insulation product. The material is CFC & HCFC free with O.D.P. zero. Light & flexible tubing enables easy and fast working. ‘INSUflex’ offers a high water vapour transmission resistance factor which ensures a low stable thermal conductivity, thereby saving energy and ensuring efficiency of the system, wherein applied. It is an environmental & user friendly product, than conventional fibrous products like Glass Wool.
Formerly: INSUtube
FR, closed cell, Chiller piping insulation, chemically crosslinked polyethylene foam pre-formed tubing
INSUshield tubing is a closed cell, fire retardant (FR), chemically crosslinked polyethylene foam (XLC) pre-formed for thermal insulation meets requirement of ‘Class O’ for fire propagation and ‘Class I’ generally confirms to surface spread of flame as per BS 476 Part 6 & Part 7 respectively.
Effective joint sealing tapes to prevent heat loss and guard against condensation
High performance special adhesive coated, FR, XLPE tapes with various facings for a perfect joint sealing application. INSUtapes are
fire-retardant, non-fibrous tri-dimensional chemically crosslinked PE foam tapes - plain / laminated with Aluminium foil on one side and other side coated with special acrylic adhesive for excellent adhesion over various substrates
Formerly: SIL radiant shield
Reflective insulation
‘INSUreflector’ is a radiant heat reflective insulation material made of polyethylene air bubble film (ABF) laminated with aluminum foil on one or both sides. It is a low e-reflective insulation material with a low mass to air ratio, which effectively blocks the radiant heat transfer. The bright surface of the Aluminium foil, which encases the FR polyethylene air bubble film material, reflects 96% to 99% infra-red radiation received by the surface of the heated slated roof. The placement of radiant heat barrier shall be in the manner to provide an air space below the roofing sheets or the vertical cladding for its effective utilization. ‘INSUreflector’ is a superior alternative to fibrous Glass Wool insulation material.
ACOUSTIC INSULATION
Formerly: Fire-retardant, open-cell engineered XLPE foam for sound insulation
HVAC equipment for a building is one of the major sources of interior noise, and its effect on the acoustical environment is important. Operation of HVAC equipment can also induce mechanical vibration that propagates into occupied spaces through structure borne paths such as piping, ductwork and mounts. These vibrations can cause direct discomfort and also create secondary radiation of noise from vibrating walls, floors, piping etc. Therefore; installing a suitable sound-absorbing liner inside the air ducts is an exceptionally effective way to reduce this air-borne noise and improve the acoustics in the building.
Supreme introduces INSUsound-xlo - a range of high-performance engineered open-cell XLPE foam specially designed for applications that require enhanced sound absorption properties. This non-fibrous, tri-dimensional chemically crosslinked fire-retardant foam provides excellent sound absorption characteristics ideally suited in duct lining application. INSUsound-xlo does not disintegrate or particulate unlike conventional products.
INSUsound-Bcap is a versatile acoustic insulator designed for noise control in the outdoors. Manufactured by special bonding technique of engineered open cell cross-linked microcellular hydrophobic polyethylene, it provides better noise control and weathering resistance which is ideal for outdoor conditions. INSUsound-Bcap has inherent self stiffness and hardness required to last long in adverse environment.
INSUsound-Bxl is engineered high performance acoustic foam. It is manufactured using exclusively developed hi-tech machines with precise selection and bonding of engineered open cell hydrophobic polyethylene in light weight. This provides a four way effect i.e. loss of sound energy on impact, deflection and change of direction, trapping of sound waves due to engineered cell orientation and absorption and barrier properties of the cells. INSUsound-Bxl is truly the best choice for noise control challenges.
INSUsound-Bn is a highly flexible open cell engineered high performance, elastomeric noise control product with an excellent sound absorption quality. It has sound insulation (barrier) and inherent vibration damping properties due to high density. It's super complex pore geometry results into optimal air flow resistivity value, making it an effective product for acoustic insulation.